Kia Sportage: Torque Converter Control Solenoid Valve (T/CON_VFS): Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Torque Converter Control Solenoid Valve (T/CON_VFS): Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS): Specifications

Specifications
Direct control VFS[T/CON]
? Control type : Normal low type
Control Pressure kpa (kgf/cm?, psi)
9.81 ~ 500.14
(0.1 ~ 5.1,1.42 ~ 72.54)
Current value(mA)
50 ~ 850
 Internal resistance(?)
5.1

Torque Converter Control Solenoid Valve (T/CON_VFS): Description and Operation
Description Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque conv ...

Torque Converter Control Solenoid Valve (T/CON_VFS): Schematic Diagrams
Circuit Diagram ...

Other Information:

Front Wheel Speed Sensor: Repair procedures
Removal 1. Remove the front wheel speed sensor mounting bolt (A). Tightening torque: 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft) 2. Remove the front wheel guard . 3. Disconnect ...

ESC operation
ESC ON condition When the ignition is turned ON, ESC and ESC OFF indicator lights illuminate for approximately 3 seconds, then ESC is turned on. Press the ESC OFF button for at least half a s ...

Categories

Copyright © www.kispmanual.com 2014-2026