Kia Sportage: 26 Brake Control Solenoid Valve(26/B_VFS): Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: 26 Brake Control Solenoid Valve(26/B_VFS): Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS): Description and Operation

Description
26Brake control solenoid valve(26/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26Brake.

Torque Converter Control Solenoid Valve (T/CON_VFS): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

26 Brake Control Solenoid Valve(26/B_VFS): Specifications
Specifications Direct control VFS[26/B] ? Control type : Normal low type Control Pressure kpa (kgf/cm?, psi)9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)Current value(mA)50 ~ 850 Internal resist ...

Other Information:

Steering Angle Sensor: Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turnin ...

Antenna Coil: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A).     Take care not to damage and scratch the shroud ...

Categories


Copyright © www.kispmanual.com 2014-2025