Kia Sportage: Shift Cable: Components and Components Location - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Shift Cable: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable: Components and Components Location

Components

1. Shift lever knob & boots assembly
2. Shift lever assembly
3. Shift cable assembly
4. Cable retainer

Shift Lever: Repair procedures
Removal 1. Remove the center console assembly. (Refer to "Interior(console)" in BD group.) 2. Disconnect sports mode connector (A). 3. Remove the shift lever assembly (D). (1) Take of ...

Shift Cable: Repair procedures
Inspection 1. Check the damage and operation of the control cable. 2. Check the damage of the boot. 3. Check the damage and corrosion of the bushing. 4. Check the damage or weakening o ...

Other Information:

Rear Door: Repair procedures
Replacement Door Trim Replacement     • Take care not to scratch the door trim and other parts. • Put on gloves to protect your hands. 1. Using ...

Rain Sensor: Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor inpu ...

Categories

Copyright www.kispmanual.com 2014-2026