Kia Sportage: Differential Carrier Assembly - Driveshaft and axle - Kia Sportage SL Service & Repair ManualKia Sportage: Differential Carrier Assembly

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Driveshaft and axle / Differential Carrier Assembly

Propeller Shaft: Repair procedures
Replacement 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts. Tightening torque : 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6 ...

Rear Differential Carrier: Components and Components Location
Component 1. Drive pinion nut 2. Oil seal3. O-ring4. Oil seal5. Front bearing6. Spacer7. Rear bearing8. Inner shim9. Drive pinion gear10. Differential carrier11. Bearing cap12. Bearing cap bolt1 ...

Other Information:

RCV Control Solenoid Valve: Description and Operation
Description RCV (Recirculation Valve) Control Solenoid Valve is installed on the intercooler inlet pipe and operates the RCV actuator which controls the by-pass passage of the turbocharger comp ...

Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start the engine). Any light that does not illuminate should be checked by an authorized Kia dealer. After starting the en ...

Categories

Copyright © www.kispmanual.com 2014-2026