Kia Sportage: Seat Belt Buckle Switch (BS): Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS): Components and Components Location

Seat Belt Buckle Switch (BS): Description and Operation

Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status inp ...

Seat Belt Buckle Switch (BS): Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. (Refer to the Body group- Front seat) 3. Loo ...

Other Information:

Components and Components Location
Components 1. Front seat belt2. Height adjuster3. Rear seat belt4. Rear seat belt [Center]5. Rear seat belt buckle ...

Rain Sensor: Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor inpu ...