Kia Sportage: Rear Body: Body Repair - Body Dimensions - Body (Interior and Exterior) - Kia Sportage SL Service & Repair ManualKia Sportage: Rear Body: Body Repair

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body (Interior and Exterior) / Body Dimensions / Rear Body: Body Repair

Side outer panel rear corner

Tail gate hinge mounting hole (O12)

Tail gate lifter mounting hole (O9)

Side outer panel rear corner

Rear bumper mounting hole (8.5X8.5)

Rear bumper mounting hole (14X16)



Rear bumper mounting hole (14X16)




Interior: Body Repair
Interior A Front pillar trim mounting hole (O8.5)Front pillar trim mounting hole (O7)Cowl crossbar mounting hole (O9)Front door checker mounting hole (O13)Cowl side trim mounting hole (O8.5)Seatb ...

Under Body: Body Repair
Projected Dimensions Front side member tooling hole (O6.5)Side cover mounting hole (O8)Front sub frame mounting hole (O17)Front sub frame mounting hole (O18)Front side member rear extension tooli ...

Other Information:

Transmitter: Repair procedures
Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check voltage if the red light doesn''t flicker ...

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehi ...

Categories


Copyright © www.kispmanual.com 2014-2025