Kia Sportage: Torque Converter Control Solenoid Valve (T/CON_VFS): Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Torque Converter Control Solenoid Valve (T/CON_VFS): Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS): Specifications

Specifications
Direct control VFS[T/CON]
? Control type : Normal low type
Control Pressure kpa (kgf/cm?, psi)
9.81 ~ 500.14
(0.1 ~ 5.1,1.42 ~ 72.54)
Current value(mA)
50 ~ 850
 Internal resistance(?)
5.1

Torque Converter Control Solenoid Valve (T/CON_VFS): Description and Operation
Description Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque conv ...

Torque Converter Control Solenoid Valve (T/CON_VFS): Schematic Diagrams
Circuit Diagram ...

Other Information:

Record your key number
The key code number is stamped on the key code tag attached to the key set. Should you lose your keys, this number will enable an authorized Kia dealer to duplicate the keys easily. Remove the k ...

Telemetics Unit (TMU): Components and Components Location
Component Connector Pin Specification No.Pin NameTypeFromToDescription (Wiring Spec.)1GNDDC GroundTMUBatteryConnected to battery ground2GNDDC GroundTMUBatteryConnected to battery ground3-----4-- ...

Categories

Copyright www.kispmanual.com 2014-2026