Kia Sportage: Transmitter precautions - Remote keyless entry - Features of your vehicle - Kia Sportage SL Owners ManualKia Sportage: Transmitter precautions

Third generation SL (2010–2016) / Kia Sportage SL Owners Manual / Features of your vehicle / Remote keyless entry / Transmitter precautions

The transmitter will not work if any of the following occurs:

When the transmitter does not work properly, open and close the door with the ignition key. If you have a problem with the transmitter, contact an authorized Kia dealer.

CAUTION

Keep the smart key away from water or any liquid as it can become damaged and not function properly.

This device complies with Industry Canada Standard RSS-210.

Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

✽ NOTICE

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If the keyless entry system is inoperative due to changes or modifications not expressly approved by the party responsible for compliance, it will not be covered by your manufacturer’s vehicle warranty.

Remote keyless entry system operations
Lock (1) All doors (and tailgate) are locked if the lock button is pressed. If all doors (and tailgate) are closed, the hazard warning lights will blink once to indicate that all doors (and tail ...

Battery replacement
A transmitter uses a 3 volt lithium battery which will normally last for several years. When replacement is necessary, use the following procedure. 1.Insert a slim tool into the slot and gently p ...

Other Information:

Propeller Shaft: Components and Components Location
Components 1. Front propeller shaft2. Center bearing bracket3. Rear propeller shaft ...

Power Door Lock Actuators: Repair procedures
Inspection Front Door Lock Actuator 1. Remove the front door trim. (Refer to the BD group - "Front door") 2. Remove the front door module. (Refer to the BD group - "Front door") 3. Disc ...

Categories


Copyright © www.kispmanual.com 2014-2025