Kia Sportage: Driveshaft and axle

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Driveshaft and axle

Pressure Sensor: Repair procedures

Inspection     If you have trouble code related to the pressure sensor (P1825, P1826, P1827, P1828), check pressure sensor according to the inspection process. Pre ...

Specifications

Specification ItemsInner sideOuter sideFront driveshaftJoint typeVTJBJMax. permissible angle23.5°46.5°Rear driveshaftJoint typeTJBJMax. permissible angle23.5°46.5°Rear differentialOil typeHyp ...

Other Information:

Front Driveshaft: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.3 ~ ...

Windshield Deicer: Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to the wiper) 2. Disconnect the windshield deicer connector (A) from the wiper motor linkage. 3. Check for continuity between the terminals ...