Kia Sportage: Engine Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Engine Electrical System

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Electrical System

Muffler: Repair procedures
Removal and Installation 1. Remove the front muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft) 2. Remove the catalytic converter (B) after removing the ...

Specifications
Specifications Ignition System ItemsSpecificationsIgnition coilPrimary resistance0.62 ± 10 % (?)Secondary resistance7.0 ± 15 % (k?)Spark plugsTypeZXU20HCR8Gap0.7 ~0.8 mm (0.0276 ~ 0.0315 in.) ...

Other Information:

Windshield Deicer: Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to the wiper) 2. Disconnect the windshield deicer connector (A) from the wiper motor linkage. 3. Check for continuity between the terminals ...

Blower Resistor: Repair procedures
Inspection 1. Measure terminal-to-terminal resistance of the blower resistor. 2. measured resistance is not within specification, the blower resistor must be replaced. (After removing the resi ...

Categories

Copyright www.kispmanual.com 2014-2026