1.Start the engine.
2.Set the mode to the desired position. For improving the effectiveness of heating
and cooling;
- Heating:
- Cooling:
3.Set the temperature control to the desired position.
4.Set the air intake control to the outside (fresh) air position (if equipped).
5.Set the fan speed control to the desired speed.
6.If air conditioning is desired, turn the air conditioning system (if equipped) on.
Panoramaroof: Repair procedures
Replacement
Movable Glass Replacement
1.
Remove the roof rack and roof moulding.
(Refer to the BD group - "Body Side Mouldings")
2.
Open the movable glass.
3.
Loosen the movable glass (A ...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Vehi ...