Kia Sportage: Rear Wiper/Washer

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Rear Wiper/Washer

Rain Sensor: Repair procedures

Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor inpu ...

Components and Components Location

Component Location 1. Rear wiper motor assembly2. Head cap3. Rear wiper motor mounting bolt4. Rear wiper motor mounting hole5. Pad cap6. Hexagonal nut7. Cover8. Rear wiper arm & blade9. Rear ...

Other Information:

PDM Relay Box: Repair procedures
Removal PDM Relay 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console assembly. (Refer to BD group - "Console") 3. Remove the PDM relay box (A) after loosening t ...

Intake Air Temperature Sensor (IATS): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the speci ...