Kia Sportage: Seat Belt Buckle Switch (BS): Components and Components Location - SRSCM - Restraint - Kia Sportage SL Service & Repair ManualKia Sportage: Seat Belt Buckle Switch (BS): Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS): Components and Components Location

Components

Seat Belt Buckle Switch (BS): Description and Operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status inp ...

Seat Belt Buckle Switch (BS): Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. (Refer to the Body group- Front seat) 3. Loo ...

Other Information:

Seat belt warning (for driver’s seat)
As a reminder to the driver, the seat belt warning light will blink for approximately 6 seconds each time you turn the ignition switch ON regardless of belt fastening. If the driver's seat be ...

Rear combination lamp: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Loose screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination ...

Categories

Copyright © www.kispmanual.com 2014-2020