Kia Sportage: Power Seat Motor: Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Seat Electrical / Power Seat Motor: Repair procedures
| Inspection |
Power Seat Motor
| 1. |
Remove the front seat.
(Refer to BD group - "Front seat") |
| 2. |
Disconnect the connectors for each motor.
|
| 3. |
With the battery connected directly to the motor terminals, check if the motors run smoothly.
|
| 4. |
Reverse the connections and check that the motor turns in reverse. |
| 5. |
If there is an abnormality, replace the motors. |
Components and Components Location
Component Location
1. Slide motor2. Rear height motor3. Reclining motor4. Power seat switch5. Reclining switch6. Lumbar support switch7. Lumbar support motor
...
Power Seat Control Switch: Repair procedures
Inspection
1.
With the power seat switch in each position, make sure that
continuity exists between the terminals below. If continuity is not as
specified, replace the power seat switch.
Remo ...
Other Information:
Compressor: Components and Components Location
Components
1. Bolt2. Disc & Hub Assembly 3. Retainer Ring (Pulley)4. Pulley5. Retainer Ring (Field coil)6. Field Coil7. Compressor Assembly
...
Blower Unit: Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad and heater blower unit.
(Refer to HA group - "Heater Unit")
3.
Remove the heater blower unit (A) fro ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright www.kispmanual.com 2014-2026