Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the center fascia panel.
(Refer to BE - "Audio") |
3. |
Remove the heater and A/C controller (A) after disconnecting the connector (B).
|
Installation |
1. |
Install the heater and A/C controller. |
2. |
Install the center fascia panel. |
Inspection |
1. |
The windshield deicer switch inputs can be checked using the GDS. |
2. |
To check the input value of windshield deicer switch, select option "BCM". |
3. |
Select option "Current Data". |
4. |
To check the input value of windshield deicer switch in force mode, select option. |
Floor mat anchor(s)
When using a floor mat on the floor carpet, make sure it attaches to the floor
mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward.
The following must be observed when in ...
Troubleshooting
Troubleshooting Guide
Before Thinking The Product Has Malfunctioned
1.
Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. ...