Kia Sportage: Rear Wiper/Washer

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Rear Wiper/Washer

Rain Sensor: Repair procedures

Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor inpu ...

Components and Components Location

Component Location 1. Rear wiper motor assembly2. Head cap3. Rear wiper motor mounting bolt4. Rear wiper motor mounting hole5. Pad cap6. Hexagonal nut7. Cover8. Rear wiper arm & blade9. Rear ...

Other Information:

To unfasten the rear center belt
1.Press the release button on the buckle (D) and remove the tongue plate (B) from the buckle (D). 2.To retract the rear center seatbelt, insert the tongue plate or similar small rigid device ...

Repair procedures
Removal 1. Remove the radiator upper cover. (Refer to the BD group - "Front bumper") 2. Remove the bolt and disconnect the horn connector, then remove the low pitch horn (A). Installation ...