Kia Sportage: Ignition Switch Assembly

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Ignition Switch Assembly

Fob Holder: Repair procedures

Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the floor console. (Refer to the BD group - "Console") 3. Disconnect the connector (B), then remove the fob holder assemb ...

Repair procedures

Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continu ...

Other Information:

Good braking practices
Check to be sure the parking brake is not engaged and the parking brake indicator light is out before driving away. Driving through water may get the brakes wet. They can also get wet when ...

Description and Operation
Description Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay. Body control module ...