Your vehicle is equipped with an occupant detection system in the front passenger's seat.
The occupant detection system is designed to detect the presence of a properly-seated front passenger and determine if the passenger's front air bag should be enabled (may inflate) or not. The driver's front air bag is not affected or controlled by the occupant detection system.
Do not put anything in front of the passenger air bag indicator.
Blower Unit: Components and Components Location
Component Location
Components
1. Intake case (LH)2. Intake case (RH)3. Blower motor4. Intake door5. Intake actuator6. Mofet [Auto type]7. Resistor [Manual type]8. Climate control air filter cove ...
Rear combination lamp: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loose screws (2EA) holding the rear combination lamp then
disconnect the connector (A) then remove the outside rear combination
...