Kia Sportage: 4WD system warning light
When the ignition switch is turned to the ON position, the 4WD indicator will illuminate and then go off in a few seconds.
If the 4WD system warning light illuminates, this indicates that there is a malfunction in the 4WD system. If this occurs, have your vehicle checked by an authorized Kia dealer as soon as possible.
KEY OUT indicator
When the ENGINE START/STOP button is in the ACC or ON position, if any door is
open, the system checks for the smart key. If the smart key is not in the vehicle,
the indicator will blink, and if ...
4WD LOCK indicator
The 4WD LOCK indicator light is illuminated when the 4WD LOCK button is pushed.
The purpose of this 4WD LOCK mode is to increase the drive power when driving on
wet pavement, snow-covered roads ...
Other Information:
Blower Resistor: Repair procedures
Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
measured resistance is not within specification, the blower resistor must be replaced. (After removing the resi ...
Recommended SAE viscosity number
Always be sure to clean the area around any filler plug, drain plug, or dipstick
before checking or draining any lubricant. This is especially important in dusty
or sandy areas and when the vehicl ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
