Special Service Tools |
Item | Illustration | Application |
Fuel Pressure Gauge (09353-24100) | Measuring the fuel line pressure | |
Fuel Pressure Gauge Adapter (09353-02100) | Connection between the high pressure fuel pump and the fuel feed line | |
Heated Oxygen Sensor Socket Wrench (09392-2H100) | Removal and installation of the heated oxygen sensor | |
Fuel Pump Locking Ring Remover (09310-2S200) | Removal and installation of the fuel pump (or sub fuel sender) locking ring | |
Torque Wrench Socket (09314-3Q100) | Removal and installation of the high pressure fuel pipe | |
Injector Combustion Seal Guide & Sizing tool (09353-2B000) | Installation of the injector combustion seal |
Immobilizer Control Unit: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Remove the steering column assembly.
(Refer to the ...
Torque Converter Control Solenoid Valve (T/CON_VFS): Description and Operation
Description
Torque converter control solenoid valve (T/CON_VFS) is
attached to the valve body. This variable force solenoid valve directly
controls the hydraulic pressure inside the torque conv ...