Specification |
Position | Output Voltage[V] | Operating Angle[°] | Range of Rod [mm], reference |
Mechanical Close end stop Position (MCP) | 4.8 | 0 | 0 |
Electrical Close end stop Position (ECP) | 4.2 | 12 | 1.8 |
Electrical Open end stop Position (EOP) | 1 | 79 | 16 |
Mechanical Open end stop Position (MOP) | 0.5 | 90 | 18 |
Item | Specification |
Coil Resistance (?) | 1.48 ~ 1.96 [21°C(69.8°F)] |
Components and Components Location
Components
1. HECU module2. Front wheel speed sensor3. Rear wheel speed sensor4. Yaw rate & Lateral & Longitudinal G sensor5. Steering angle sensor6. ABS Warning lamp7. Parking brake/EBD ...
Input Speed Sensor: Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the valve body assembly.
(R ...