Kia Sportage: SS-A Solenoid Valve(ON/OFF): Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: SS-A Solenoid Valve(ON/OFF): Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-A Solenoid Valve(ON/OFF): Description and Operation

Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.
SS-A Solenoid valve(ON/OFF) is installed at valve body.

Overdrive Clutch Control Solenoid Valve(OD/C_VFS): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

SS-A Solenoid Valve(ON/OFF): Specifications
Specifications ON/OFF Solenoid Valve(SS-A) ? Control type : Normal low type Control pressure kpa (kgf/cm?, psi)490.33(5.0, 71.12) Internal resistance(?)10 ~ 11 ...

Other Information:

Operation of the Back up warning system
Operating condition This system will activate when backing up with the ignition switch ON. If the vehicle is moving at a speed over 10 km/h (6 mph), the system may not be activated correctl ...

Intake Air Temperature Sensor (IATS): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the speci ...

Categories


Copyright © www.kispmanual.com 2014-2024