Kia Sportage: Side Impact Sensor (SIS): Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Restraint / SRSCM / Side Impact Sensor (SIS): Description and Operation
| Description |
Side Impact Sensor (SIS) system consists of two P-SIS which
are installed at each center of the front door module (LH and RH) and
two SIS which are installed at each center pillar nearby (LH and RH).
Side Pressure Sensor is also called P-SIS because that detects pressure due to collision at its mounting location.
Side Impact Sensor is also called A-SIS because that detects acceleration.
SRSCM decides deployment or not of the airbag and the time of
deployment through the collision signal of SIS when the collision
occurred.
Front Impact Sensor (FIS): Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front i ...
Side Impact Sensor (SIS): Components and Components Location
Components
...
Other Information:
Engine temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch
is ON.
Do not continue driving with an overheated engine. If your vehicle overheats,
refer to “If the engine ov ...
DBC Switch: Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad side switch assembly.
3.
Check the continuity between the switch terminals as ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright www.kispmanual.com 2014-2026