Kia Sportage: Side Airbag (SAB) Module: Description and Operation

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Restraint / Airbag Module / Side Airbag (SAB) Module: Description and Operation

Description

The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.

Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Passenger Airbag (PAB) Module: Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 2. Remove the crash pad garnish. (Refer to the Body group- crash pad). 3. Disco ...

Side Airbag (SAB) Module: Components and Components Location

Components ...

Other Information:

Fuel Filler Cap: Description and Operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and t ...

RCV Control Solenoid Valve: Description and Operation
Description RCV (Recirculation Valve) Control Solenoid Valve is installed on the intercooler inlet pipe and operates the RCV actuator which controls the by-pass passage of the turbocharger comp ...

Kia Sportage: Side Airbag (SAB) Module: Description and Operation

Passenger Airbag (PAB) Module: Repair procedures

Side Airbag (SAB) Module: Components and Components Location

Other Information:

Categories