Kia Sportage: Anchor Pretensioner: Description and Operation

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Restraint / Seat Belt Pretensioner / Anchor Pretensioner: Description and Operation

Description

Anchor pretensioner operates as well as belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it is an equipment to make up for the existing short stroke. Anchor pretensioner is supported by two cables and it is an auxiliary equipment to prevent a driver from breaking away doubly as seat belt is being pulled toward anchor side after a collision.

Never measure resistance of anchor pretensioner directly, current of measuring device may cause unexpected airbag deploy.

Seat Belt Pretensioner (BPT): Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. To remove the seat belt anchor pretensioner (C), keep on pushing the lock pi ...

Anchor Pretensioner: Components and Components Location

Components ...

Other Information:

Auto light position
When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle. Never place anything ...

Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When r ...

Kia Sportage: Anchor Pretensioner: Description and Operation

Seat Belt Pretensioner (BPT): Repair procedures

Anchor Pretensioner: Components and Components Location

Other Information:

Categories