Kia Sportage: Panoramaroof: Components and Components Location - Exterior - Body (Interior and Exterior) - Kia Sportage SL Service & Repair ManualKia Sportage: Panoramaroof: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body (Interior and Exterior) / Exterior / Panoramaroof: Components and Components Location

Components

1. Panoramaroof frame assembly
2. Movable glass assembly
3. Wind deflector assembly
4. Mechanism assembly
5. Impact bracket
6. Impact cross member assembly
7. EMC metal sheet
8. Motor assembly

Body Side Moulding: Repair procedures
Replacement Roof Rack Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related par ...

Panoramaroof: Repair procedures
Replacement Movable Glass Replacement 1. Remove the roof rack and roof moulding. (Refer to the BD group - "Body Side Mouldings") 2. Open the movable glass. 3. Loosen the movable glass (A ...

Other Information:

Oil Pressure Switch: Repair procedures
Inspection 1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. Check the continuity between the terminal ...

Seat Belt Buckle Switch (BS): Description and Operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status inp ...

Categories

Copyright www.kispmanual.com 2014-2026