Kia Sportage: START/RUN - ENGINE START/STOP button position - Engine start/stop button - Driving your vehicle - Kia Sportage SL Owners ManualKia Sportage: START/RUN

Third generation SL (2010Ц2016) / Kia Sportage SL Owners Manual / Driving your vehicle / Engine start/stop button / ENGINE START/STOP button position / START/RUN

Not illuminated

Х With automatic transaxle

To start the engine, depress the brake pedal and press the ENGINE START/ STOP button with the shift lever in the P (Park) or the N (Neutral) position. For your safety, start the engine with the shift lever in the P (Park) position.

If you press the ENGINE START/STOP button without depressing the brake pedal for automatic transaxle vehicles, the engine will not start and the ENGINE START/STOP button changes as follow:

✽ NOTICE

If you leave the ENGINE START/ STOP button in the ACC or ON position for a long time, the battery will discharge.

WARNING - Starting vehicle

Never press the ENGINE START/STOP button while the vehicle is in motion except in an emergency. If the engine stops while the vehicle is in motion, this would result in loss of directional control and braking function, which could cause an accident.

ON
Green indicator Х With automatic transaxle Press the ENGINE START/STOP button while it is in the ACC position without depressing the brake pedal. The warning lights can be checked before the en ...

Starting the engine with a smart key
1.Carry the smart key or leave it inside the vehicle. 2.Make sure the parking brake is firmly applied 3.Automatic Transaxle - Place the transaxle shift lever in P (Park). Depress the brake pedal f ...

Other Information:

Heater & A/C Control Unit(Manual): Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Using the screwdriver, remove the cluster facia panel (A). 3. Using the screwdriver, remove the crash pad garnish (A). 4. ...

Front Hub / Knuckle / Tone Wheel: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.3 ~ ...

Categories

Copyright © www.kispmanual.com 2014-2019