Kia Sportage: BCM (Body Control Module)

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / BCM (Body Control Module)

Transmitter: Repair procedures

Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check voltage if the red light doesn''t flicker ...

Body Control Module (BCM): Specifications

Specifications Electrical Performance ItemRequirementRemarkRated voltageDC 12VOperating voltage rangeDC 9 ~ 16VShall activate normally in these rangeOperating temperature range-30°C ~ +80°CSha ...

Other Information:

Main fuse and multi fuse
If the main fuse and multi fuse is blown, it must be removed as follows: 1.Disconnect the negative battery cable. 2.Remove the nuts shown in the picture above. 3.Replace the fuse with a new one o ...

Accelerator Position Sensor (APS): Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer t ...