Kia Sportage: Body Control Module (BCM): Specifications - BCM (Body Control Module) - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Body Control Module (BCM): Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / BCM (Body Control Module) / Body Control Module (BCM): Specifications

Electrical Performance
Rated voltage
DC 12V

Operating voltage range
DC 9 ~ 16V
Shall activate normally in these range
Operating temperature range
-30°C ~ +80°C
Shall conserve normally in these range.
Storage temperature range
-40°C ~ +85°C
Max humidity in use

High voltage resistance
24V/1min, 18V/1hour
After overvoltage is the Normal behavior
Insulation resistance
100M? or more
(measured with 500V MEGGER)
Specify as well as parts that insulation like PCB, moisture-proof COATING is required.
Quiescent current
KEYLESS spec : 6mA or less
SMK spec : 5.5mA or less
NON-KEYLESS : 4mA or less
Measure when the state, all output loads are OFF and there are no Input SW(including TX operation) changes, continues 2sec.
Voltage drop
1.2V or less
but, Terminal B9, B20, C1, C2, C3, C13, C14, C15, C16 is 2.0V or less.

BCM (Body Control Module)

Body Control Module (BCM): Schematic Diagrams
Circuit Diagram ...

Other Information:

Seatbelt Warning Lamp and Indicator Chime
This lamp illuminates and an indicator chime will sound if the driver seatbelt has not been fastened when the vehicle's ignition is turned on. Conditions of operation ...

Changing a Fuse
Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical ...


Copyright © 2014-2022