Component |
No | Connector A | No | Connector A |
1 | Rear wiper motor (Power) | 11 | IPM (Rear wiper 15A) |
2 | IPM | 12 | Rear wiper motor (Signal) |
3 | Stop lamp | 13 | - |
4 | - | 14 | - |
5 | ESC unit | 15 | GND |
6 | U_H_Box (ABS 7.5A fuse) | 16 | IPM (BCM) |
7 | Stop lamp switch | 17 | IPM (Door lock 15A) |
8 | Stop lamp 10A fuse | 18 | Door lock actuator - driver |
9 | - | 19 | - |
10 | - | 20 | - |
Rated voltage | DC 12V |
Operating voltage range | DC 9~16V |
Operating temperature range | -22~167 °F(-30~75 °C) |
Preservation temperature range | -40~185 °F(-40~85 °C) |
Insulation resistance | 100M? MIN. / 500VM |
No. | Function | Current specification | Load type | Voltage dropping | Remarks | |
Rated | Max. | |||||
1 | Rear wiper | 10A | 25A | Motor | Max. 0.5 V | Test voltage : 13.5 V |
2 | DBC(stop lamp) | 10A | 25A | Illumination |
Air intake control
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
With the reci ...
With the door lock button
To unlock a door, push the door lock button (1) to the “Unlock” position.
The red mark (2) on the button will be visible.
To lock a door, push the door lock button (1) to the “Lock” position ...