Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the cluster fascia panel.
(Refer to the BD group - "Crash pad") |
3. |
Disconnect the connector (A). |
4. |
Remove the start/stop button (A) after loosening the mounting 3 screws. |
Installation |
1. |
Install the start/stop button. |
2. |
Install the left air vent. |
Anchor Pretensioner: Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work.
2.
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pi ...
Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions
only for the maintenance items that are easy to perform.
As explained earlier in this section, several procedu ...