Kia Sportage: Valve Body: Description and Operation - Hydraulic System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Valve Body: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Hydraulic System / Valve Body: Description and Operation

Description
The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The body also features electronic solenoid valves that ensure smooth gear changes.

Valve Body: Components and Components Location
Component Location 1. Automatic transaxle2. Valve body assembly 1. Pressure Control Valve(PCV) adjust screw2. Solenoid valve bracket3. Oil temperature sensor4. Line Pressure Control Solenoid ...

Valve Body: Repair procedures
Removal 1. Remove the under cover (A). Tightening torque : 19.6 ~ 24.5 N.m (2.0 ~ 2.5 kgf.m, 14.5 ~ 18.1 lb-ft) 2. Remove the drain plug (A) and drain the ATF totally and then reinstall ...

Other Information:

Room Lamp: Repair procedures
Inspection 1. Remove the room lamp assembly connector then check for continuity between terminals. Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) fro ...

Interior Trim: Repair procedures
Replacement Door Scuff Trim Replacement     • Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trip pieces to ...

Categories


Copyright © www.kispmanual.com 2014-2025