Replacement |
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the bolt & nut and then disconnect the shock absorber (A) with the rear axle.
|
3. |
Loosen the shock absorber mounting bolts (A).
|
4. |
Installation is the reverse of removal. |
Inspection |
1. |
Check the rubber parts for wear and deterioration. |
2. |
Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation. |
Brake/clutch fluid
Checking the brake/clutch* fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX and MIN marks on the side of the reservoir.
Before removing the ...
Seat belt warning (for front passenger’s seat)
As a reminder to the front passenger, the front passenger's seat belt warning
light will blink for approximately 6 seconds each time you turn the ignition switch
ON regardless of belt fasten ...