Kia Sportage: Output Speed Sensor: Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Output Speed Sensor: Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor: Specifications

Specifications
? Type: Hall effect sensor
Operation condition (°C)°F
(-40~150) -40~302
Air gap (mm)in.
(0.25~0.70) 0.0098~0.0276
Output voltage (V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Output Speed Sensor: Description and Operation
Description The Output Speed Sensor is a vital unit that measures the rate of rotation of the transmission''s turbine shaft and output shaft, and delivers the readings to the TCM. ...

Output Speed Sensor: Schematic Diagrams
Circuit Diagram ...

Other Information:

Coolant: Repair procedures
Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the rad ...

Oil Cooler: Repair procedures
Removal 1. Loosen the drain plug, and drain the coolant. Remove the radiator cap to speed draining. 2. Disconnect the oil cooler coolant hoses (A). 3. Remove the oil filter (A). 4. Loo ...

Categories


Copyright © www.kispmanual.com 2014-2025