Side Body A |
Front side member tooling hole (O20) | Fender apron panel tooling hole (O10) | Front door upper hinge mounting hole (O13) |
Front door lower hinge mounting hole (O13) | Fender panel mounting hole (O6.6) | Rear door upper hinge mounting hole (O10) |
Rear door lower hinge mounting hole (O13) | Rear door switch mounting hole (O13) | Rear combination lamp mounting hole (O10) |
Rear bumper mounting hole (O6) | Side sill moulding mounting hole (8.5X8.5) |
Side Body B |
Side outer panel notch | Side outer panel notch | Side outer panel notch |
Side outer panel notch | Side outer panel notch | Front door switch mounting hole (O10) |
Side outer panel notch | Side outer panel notch | Side outer panel notch |
Side outer panel notch | Side outer panel notch | Rear door switch mounting hole (O10) |
CVVT Oil Temperature Sensor (OTS): Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OTS connector.
3.
Remove the OTS.
4.
After immersing the thermistor of the sensor into engine coolant, measure resistance ...
Electric Waste Gate Actuator (EWGA): Description and Operation
Desrcription
The Electric WGT Control Actuator is installed on the turbocharger.
It operates the vain in the Waste Gate Turbocharger (WGT) and
regulates the compressed air amount by the ECM''s P ...