Kia Sportage: Positive Crankcase Ventilation (PCV) Valve: Repair procedures - Crankcase Emission Control System - Emission Control System - Kia Sportage SL Service & Repair ManualKia Sportage: Positive Crankcase Ventilation (PCV) Valve: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve: Repair procedures

Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).

Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

   
If the plunger does not move (PCV valve is clogged), clean or replace the valve.
Installation
1.
Installation is reverse of removal.

PCV Valve installation:
1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft)

Positive Crankcase Ventilation (PCV) Valve: Description and Operation
Operation Principle ...

Evaporative Emission Control System
...

Other Information:

Troubleshooting
Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptomProbable causeRemedyThe set vehicle speed varies greatly upward or downward"Surging" (repeated alternating accelerati ...

Rear Hub - Carrier: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.3 ~ 1 ...

Categories

Copyright © www.kispmanual.com 2014-2019