Oil Seal: Repair procedures
Replacement
[Right side]
1.
Remove the driveshaft assembly. (RH side)
(Refer to "Front Driveshaft" in Driveshaft and axle)
2.
Remove the dust cover (A).
3.
Remove the oil seal (A, B).
...
ICM (Integrated Circuit Module) Relay Box: Repair procedures
Inspection
Rear Wiper Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.11 in the A and
No.12 in the A terminals when power and ground are connect ...