Kia Sportage: Front Hub / Knuckle / Tone Wheel: Components and Components Location - Front Axle Assembly - Driveshaft and axle - Kia Sportage SL Service & Repair ManualKia Sportage: Front Hub / Knuckle / Tone Wheel: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle / Tone Wheel: Components and Components Location

Components

1. Brake disc screw
2. Brake disc
3. Hub
4. Hub bolt
5. Dust cover
6. Knuckle
7. Wheel bearing
8. Snap ring

Front Axle Assembly
...

Front Hub / Knuckle / Tone Wheel: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.3 ~ ...

Other Information:

Ultrasonic Sensor: Repair procedures
Removal 1. Lift up the vehicle. (Refer to GI group - "Lift and support points") 2. Remove the rear bumper. (Refer to the BD group - "Rear bumper") 3. Pull out the sensor by opening the s ...

Heated Oxygen Sensor (HO2S): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. 4. Measure resistance between the HO2S t ...

Categories


Copyright © www.kispmanual.com 2014-2024