Kia Sportage: Rear Hub - Carrier: Components and Components Location - Rear Axle Assembly - Driveshaft and axle - Kia Sportage SL Service & Repair ManualKia Sportage: Rear Hub - Carrier: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier: Components and Components Location

Components

1. Hub cover
2. Carrier assembly
3. Hub & bearing assembly
4. Hub mounting bolt
5. Bushing
6. Bushing
7. Carrier assembly
8. Bearing
9. Snap ring
10. Hub assembly
11. Hub bolt
12. Bushing

Rear Axle Assembly
...

Rear Hub - Carrier: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.3 ~ 1 ...

Other Information:

Propeller Shaft: Repair procedures
Replacement 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts. Tightening torque : 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6 ...

USING THE USB DEVICE
To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. If you start the engine when the USB device is connecte ...

Categories


Copyright © www.kispmanual.com 2014-2024