Kia Sportage: Heater & A/C Control Unit(Manual): Repair procedures| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Using the screwdriver, remove the cluster facia panel (A).
|
| 3. |
Using the screwdriver, remove the crash pad garnish (A).
|
| 4. |
Using the screwdriver, remove the screws and center facia panel (A).
|
| 5. |
Disconnect the center facia connectors (A).
|
| 6. |
Loosen the control panel mounting screws and then remove the control panel (A).
|
| 7. |
Disconnect the connectors and then remove the control panel(B).
|
| 8. |
Installation is the reverse order of removal. |
Heater & A/C Control Unit(Manual): Components and Components Location
Heater & A/C Control Unit(Full Automatic): Components and Components LocationRear Body: Body Repair
Side outer panel rear cornerTail gate hinge mounting hole (O12)Tail gate lifter mounting hole (O9)Side outer panel rear cornerRear bumper mounting hole (8.5X8.5)Rear bumper mounting hole (14X16)Re ...
Starter: Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Remove the ...