Kia Sportage: Cooling System - Engine Mechanical System - Kia Sportage SL Service & Repair ManualKia Sportage: Cooling System

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Mechanical System / Cooling System

Cylinder Block: Repair procedures
Disassembly     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the co ...

Troubleshooting
Engine Overheat Troubleshooting Inspection RemedyVisual inspectionInspect for shortage of coolant in reservoir tank .Reinspect after replenishing coolant.Inspect for coolant pollution after remo ...

Other Information:

Rear Wheel Speed Sensor: Repair procedures
Removal 1. Remove the rear wheel speed sensor mounting bolt (A). Tightening torque: 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft) 2. Remove the luggage side trim the disconnect the r ...

Main fuse and multi fuse
If the main fuse and multi fuse is blown, it must be removed as follows: 1.Disconnect the negative battery cable. 2.Remove the nuts shown in the picture above. 3.Replace the fuse with a new one o ...

Categories

Copyright www.kispmanual.com 2014-2026